The world’s largest 幸运飞行艇官方开奖记录查询,开奖历史记录 幸运飞行艇官方开奖历史记录 幸运飞行艇官方开奖号码记录 - 168官方开奖结果新版 幸运飞行艇官方开奖直播查询 结果号码查询 selection of electronic components in stock for immediate shipment! ^®

YAGEO cement resistors offer various types with a wide resistance range, handling medium to high power. Custom dimensions are available.

ARTESYN/Advanced Energy AIF42BAC-01N series full-brick modules accept a wide 90 VAC to 264 VAC input. The modules are rated at 504 W, have a high conversion efficiency of 93% (typical) and provide a nominal isolated output voltage of 12 VDC with a 10 V auxiliary output.

• Performance up to 156 Gbps PAM4 (28 Gbps NRZ)
• Single-ended 50 Ω and differential 100 Ω standards
• Rugged features and options available
• 30, 34, 36 & 38 AWG coax and twinax construction

ASSMANN waterproof LEDs are designed for use as visual indicators in outdoor equipment, marine devices, and industrial units such as testers, generators, and displays.

The ADuM4195-1 is an isolation amplifier based on iCoupler® technology and has very low offset and gain error, making it ideal for many isolated voltage sensing applications. The Single-Ended Output allows for easier signal conditioning on output of chip leads to reduced layout and lower BOM costs.

Discover the complete flat flexible connectivity solution from Molex in this handy online guide. Navigate through the range to select the connector, specify the cable length, flex life cycles and contact layout type, or determine retention, speed or temperature needs.

The low-profile designs of the Bourns GDT225EX and GDT230E series gas discharge tube arrestors make them especially suitable for high-density, space-constrained applications requiring an exceptionally high-performance energy-diversion component.

MEAN WELL’s 25 W to 60 W multiple-stage constant power/constant voltage LED drivers with UL Class P

32-bit microcontrollers based on the Arm® Cortex®-M85 core with Helium and TrustZone®, delivering breakthrough performance of 6.39 CoreMarks/MHz, with fully deterministic, low-latency, real-time operation that enables the most demanding application needs.

In industrial and commercial settings, unexpected relay failures can lead to costly downtime and safety hazards. Littelfuse’s SRP1-CB and SRP1-CR solid-state relays (SSRs) address this issue with a design focused on reliability and longevity, even in the most challenging environments.

Murata offers a shielded, ultra-small dual-band Wi-Fi® 11a/b/g/n/ac + Bluetooth® 5.4 module that brings high performance. Based on the Infineon CYW43022 combo chipset, this module implements highly sophisticated, enhanced collaborative coexistence hardware mechanisms and algorithms.

• Long-life MOSFET relay, switching 400mA at 60V 
• High Frequency relay, up to 20GHz signal band support
• New WSON Package for an Ultra Compact solution
• Wide -40 to +110C Ambient Operating Temperature

TDK-Lambda's i1C series are non-isolated buck-boost converters delivering up to 200 W in a 1” x 1” footprint. Operating from 9 V - 36 V or 18 V - 75 V inputs, with adjustable outputs of 9.6 V - 28 V, they support multiple system voltages. High efficiency up to 98% and -40°C to +120°C operation.

3M™ EMI AB7000E series is a magnetic EMI absorber for suppressing near-field EMI noise from 300 MHz to 4 GHz. The absorber features a layer of polymeric resin with a soft, flexible magnetic flake filler, an optional pressure-sensitive adhesive, and a release liner.

• LAN and LAN RJ45 transformer and Modular Jack Solutions.
• Compliant with IEEE 802.3 standards.
• Discrete solutions for Ethernet protocol. 
• Multi-port and multi-type configurations.

• Protective coating resistant to dust, corrosive gases, and humidity
• Dynamic boost up to 150% for five seconds
• Minimal installation depth of just 125 mm
• Powerful output characteristic curve

The RJE36 series Combo-stacked I/O connectors offer RJ primary ports with USB A, USB C, or HDMI as secondary port. Designed for communication, storage, consumer, home, industrial, and medical markets, they support 750 mating cycles and operate from -55°C to +85°C, ensuring durability and reliable performance.

SICK's W10 photoelectric proximity sensor's ease of use, sturdy design, and performance make it ideal for precise object detection in demanding environments. The touchscreen display is intuitive to use, allowing parameters to be set quickly.

Belden's 2KV VFD cables offer enhanced insulation thickness and lower capacitance for lower cable charging losses and reflected wave energy, increasing system efficiency. The symmetric ground conductor reduces damaging bearing currents. Dual copper-tape shields reduce noise and ground currents.

Panel-mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting hardware and terminals are situated on the back side of the panel, reducing the required clearance to a minimum.

Panduit and DigiKey partner together to empower logistics automation providers and e-commerce retailers with specialized expertise and innovative solutions.